[vc_row][vc_column][vc_tta_tour style=”modern” color=”sky” spacing=”2″ gap=”1″ active_section=”1″][vc_tta_section title=”Features” tab_id=”1545581598179-660fe406-aaa8″][vc_column_text]
- Fully self-contained flash/fire point test module
- Ambient to 400 °C
- Gas or electric ignition
- Automatic heating control, flash and fire detection
- Automatic test results & end of test audible warning
- Automatic snuffer
- Automatic barometric correction
[/vc_column_text][/vc_tta_section][vc_tta_section title=”Technical Specifications” tab_id=”1545581598190-53870fe7-af5c”][vc_column_text]
Temperature Range | Ambient to 400 °C |
Bath | N/A |
Heating | Hotplate |
Post Test Cooling | Fan assisted or Forced Air (Requires 34008-0 Cooling Boost Module option) |
Post Test Cool-down Time (90°C to 50°C) | 9 minutes (Fan) 6 minutes (Forced Air) |
Ignitor | Quick-fit coaxial gas jet / electric hot wire, user selectable (Electric hot wire pilot light for gas jet) |
Temperature Probe | Class A Platinum Resistance Thermometer, °C or °F |
Flash / Fire Detection | Ionisation Ring |
Gas Supply (gas jet ignitor) | Laboratory gas, 3 kPa (0.44 psi) maximum pressure |
Air Supply (forced air cooling | Dry compressed air, 670 kPa (100 psi) maximum pressure |
[/vc_column_text][/vc_tta_section][vc_tta_section title=”Data Sheet, Brochures” tab_id=”1545581600047-046fcad2-e63c”][/vc_tta_section][vc_tta_section title=”video” tab_id=”1545681154224-d7fe74e7-0830″][/vc_tta_section][vc_tta_section title=”Application Notes” tab_id=”1545581611988-20ede119-6ff3″][/vc_tta_section][vc_tta_section title=”Standard Method” tab_id=”1545581615091-5b2aac71-0552″][vc_column_text]
BS DIN EN ISO 2592 | Determination of flash and fire points. Cleveland open cup method |
ASTM D92 | Standard test method for flash and fire points by cleveland open cup |
IP 36 | Determination of flash and fire points – Cleveland open cup method (ISO 2592:2000) |
[/vc_column_text][/vc_tta_section][/vc_tta_tour][/vc_column][/vc_row]